# LATNEX AF-5000

> Three-in-one meter with a three-axis 50/60 Hz magnetic sensor, a 50–2,000 V/m electric-field mode and an RF mode specified from 50 MHz to 10 GHz, in which the manufacturer states that readings below 1 GHz and from 8 to 10 GHz are for reference only.

- Canonical URL: https://emfbase.com/instruments/latnex-af-5000
- Collection: Meter models
- Record id: `instruments:latnex-af-5000`
- Status: verified
- Last verified: 2026-08-12
- JSON: https://emfbase.com/api/instruments/latnex-af-5000
- Also known as: AF-5000, AF5000, LATNEX all-in-one 5G EMF meter

## Key values

- **Manufacturer:** LATNEX
- **Model:** AF-5000
- **Type:** Multi-field meter
- **Instrument class:** Broadband RF power-density meter
- **Quantities measured:** power density, electric field strength, magnetic flux density
- **Axes:** mixed
- **Peak hold:** No
- **On-device logging:** No
- **Declared accuracy:** RF ±2 dB at 2.45 GHz; magnetic ±(15% + 100 digits); electric ±(7% + 50 digits) — Manufacturer figure, not an independent verification.
- **Market status:** Currently sold

## Frequency coverage by mode

One band per measuring mode, as the manufacturer states it.

- **power density** — RF: 50 MHz – 10 GHz (reference only below 1 GHz and 8–10 GHz)
- **magnetic flux density** — Magnetic: 50/60 Hz only
- **electric field strength** — Electric: 50/60 Hz only

## Display range by mode

- **Magnetic field, three-axis** — 20 / 200 / 2000 mG (2 / 20 / 200 µT) (resolution 0.02 / 0.1 / 1 mG)
- **Electric field** — 50 – 2,000 V/m
- **RF power density** — 0.02 µW/m² – 554.6 mW/m² (36.1 mV/m – 14.46 V/m, −51 to 16 dBm) (resolution 0.02 µW/m²)

## Calibration

No calibration certificate is listed with the meter.

## Suited to

- An inexpensive first look at all three field types, with the three-axis magnetic reading being the strongest mode
- Screening for elevated wiring and appliance magnetic fields at 50/60 Hz

## What it cannot do

- RF figures below 1 GHz and between 8 and 10 GHz are reference only by the manufacturer's own statement, which rules out quantitative work on FM, TETRA, 700–800 MHz cellular bands and anything above 8 GHz
- The magnetic sensor responds at 50/60 Hz only, so it cannot quantify inverter, induction-hob or traction fields in the intermediate range
- ±(15% + 100 digits) on the magnetic mode is a wide tolerance at low field strengths
- No peak-hold, so short pulsed bursts are under-reported
- No logging and no frequency identification

## What these figures are

Every number on this page is the manufacturer's own declared specification, reproduced so that models can be compared field by field. Nothing here is an independent test of the instrument, a calibration certificate, or a statement that a reading taken with it can be compared with a regulatory limit — that depends on the detector, the averaging and, where it matters legally, an accredited calibration.

## Where to buy

[EMR Shielding Solutions](https://www.emrss.com/products/5g-emf-meter-af-5000) (rel: nofollow noopener)

EMR Shielding Solutions is a related company of WebKMS, which publishes EMFBase, and sells this product. The link is a stockist listing only: every figure on this page comes from the manufacturer's own documentation, and no specification, limitation or citation depends on it.

## Related records

- [Broadband RF power-density meter](https://emfbase.com/meters/broadband-rf-meter): The general-purpose instrument for Wi-Fi, cellular, 5G, smart meters and cordless phones: reports total power density across a wide band in µW/m² or mW/m², with peak-hold and average modes.
- [ELF gaussmeter (power-frequency magnetic field)](https://emfbase.com/meters/elf-gaussmeter): Measures 50/60 Hz magnetic flux density in milligauss or microtesla — the instrument for wiring faults, service panels, transformers and power lines.
- [Intermediate-frequency magnetic field meter](https://emfbase.com/meters/intermediate-frequency-meter): Covers the kilohertz gap between an ELF gaussmeter and an RF meter — the band occupied by induction hobs, EV inverters, solar optimisers and switch-mode supplies.
- [Which EMF meter should I buy?](https://emfbase.com/questions/which-emf-meter-should-i-buy): Match the instrument class to the quantity: RF meter, three-axis gaussmeter, E-field/body-voltage kit, or IF meter. Demand stated band, real units, peak-hold and calibration.

## Sources

- `latnex-af-5000` LATNEX. *LATNEX AF-5000 5G EMF meter — specifications*. https://www.latnex.com/products/af-5000 — manufacturer, link checked 2026-08-12

Data licence: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Dataset version 2026.08.1. Retrieved from EMFBase, https://emfbase.com.

This record is reference data, not medical or legal advice. Regulatory limits, scientific guidelines and precautionary values are labelled separately and answer different questions.