CORNET ED98QPro5G
Four-mode CORNET meter adding a light-flicker and waveform mode to the RF, magnetic and electric modes of the ED88T line, with real-time waveform display at 42 µs per sample and logging to 0.001 s intervals.
Last verified 12 August 2026.
Also searched as: ED98 QPro5G, ED98QPro
- Manufacturer
- CORNET Microsystems Inc.
- Model
- ED98QPro5G
- Type
- Multi-field meter
- Instrument class
- Broadband RF power-density meter
- Quantities measured
- power density, electric field strength, magnetic flux density, frequency
- Axes
- single
- Peak hold
- Yes
- On-device logging
- Yes
- Market status
- Currently sold
Frequency coverage by mode
One band per measuring mode, as the manufacturer states it.
- power density
- RF: 100 MHz – 8 GHz
- magnetic flux density
- LF magnetic: 50 Hz – 10 kHz
- electric field strength
- LF electric: 50 Hz – 50 kHz
- frequency
- Frequency counter: 100 MHz – 4.2 GHz
Display range by mode
- RF power density
- 0.18 µW/m² – 1.8 W/m² (−65 to +5 dBm)
- RF field strength
- 8.2 mV/m – 26 V/m
- LF magnetic
- 0.1 – 600 mG
- LF electric
- 10 – 1,000 V/m
- Light flicker
- Percentage flicker and waveform
Calibration
No calibration certificate is offered; frequency-band correction is programmable by the user, as on the rest of the CORNET range.
Suited to
- Adding LED and screen flicker to an EMF survey without carrying a second instrument
- Looking at pulse structure directly: the waveform mode samples every 42 µs
- The same RF, magnetic and electric survey work as the ED88T line
What it cannot do
- Single-axis in every field mode
- Frequency counter still stops at 4.2 GHz
- Flicker percentage is not an EMF quantity and cannot be compared with any exposure limit in this dataset
- No accredited calibration
What these figures are
Every number on this page is the manufacturer's own declared specification, reproduced so that models can be compared field by field. Nothing here is an independent test of the instrument, a calibration certificate, or a statement that a reading taken with it can be compared with a regulatory limit — that depends on the detector, the averaging and, where it matters legally, an accredited calibration.
Where to buy
EMR Shielding Solutions is a related company of WebKMS, which publishes EMFBase, and sells this product. The link is a stockist listing only: every figure on this page comes from the manufacturer's own documentation, and no specification, limitation or citation depends on it.
Related records
- Broadband RF power-density meter
The general-purpose instrument for Wi-Fi, cellular, 5G, smart meters and cordless phones: reports total power density across a wide band in µW/m² or mW/m², with peak-hold and average modes.
Instruments
- Light flicker meter
Measures modulation depth and frequency of a light source, the optical counterpart to dirty-electricity measurements and the metric behind LED comfort complaints.
Instruments
- CORNET ED88TPlus5G2
Multi-field meter combining RF power density from 100 MHz to 8 GHz, a 50 Hz – 10 kHz magnetic mode, a 50 Hz – 50 kHz electric-field mode, a 100 MHz – 4.2 GHz frequency counter and logging to 1,000 samples.
Meter models
Sources
- cornet-selection-guide CORNET electrosmog meter selection guide — model comparison table — CORNET Microsystems Inc.. manufacturer, link checked 2026-08-12.
Same record, other formats