Meter models
Named meter models with the frequency band, mode structure, display range, accuracy and calibration position each manufacturer declares, and the measurements each model's own datasheet rules out. Every figure is a manufacturer specification, not an independent test of the instrument.
Three-axis true-magnitude AC gaussmeter covering 13 Hz to 75 kHz to 1999.99 mG at 0.01 mG resolution, typically ±3% between 45 Hz and 5 kHz, supplied with a NIST-traceable calibration certificate.
AlphaLab, Inc. · 13 Hz – 75 kHz (−3 dB), with a 1 kHz – 75 kHz VLF-only setting · triple-axis
Multi-field meter combining RF power density from 100 MHz to 8 GHz, a 50 Hz – 10 kHz magnetic mode, a 50 Hz – 50 kHz electric-field mode, a 100 MHz – 4.2 GHz frequency counter and logging to 1,000 samples.
CORNET Microsystems Inc. · RF: 100 MHz – 8 GHz · single-axis
Four-mode CORNET meter adding a light-flicker and waveform mode to the RF, magnetic and electric modes of the ED88T line, with real-time waveform display at 42 µs per sample and logging to 0.001 s intervals.
CORNET Microsystems Inc. · RF: 100 MHz – 8 GHz · single-axis
Single-axis broadband RF meter reading 200 MHz – 8 GHz with a peak display from 0.02 to 10.00 V/m and a true time-averaged display from 0.1 to 250,000 µW/m², plus an audio output for identifying sources by ear.
EMFields Solutions Ltd · 200 – 8,000 MHz, ±6 dB ±0.02 V/m · single-axis
Body-worn RF monitor with three orthogonal E and H probes covering 50 MHz to 60 GHz, shaped to the occupational reference levels of ICNIRP 2020, FCC/NCRP OET65, Canada Safety Code 6 and IEEE C95.1, reporting time-averaged exposure as a percentage of the selected standard.
FieldSENSE (Pty) Ltd · 50 MHz – 60 GHz, shaped occupational response · triple-axis
Professional RF analyser with switchable peak and true-RMS detection, 700 MHz – 2.7 GHz with the supplied log-periodic antenna (−3 dB at 3.3 GHz) or 27 MHz – 3.3 GHz with the isotropic UBB27 antenna, reading 0.001 µW/m² to 1,999 mW/m² depending on preamplifier and attenuator.
Gigahertz Solutions GmbH · 700 MHz – 2.7 GHz with the LogPer antenna, −3 dB at 3.3 GHz · mixed-axis
Low-frequency analyser for AC electric and magnetic fields from 16 Hz to 100 kHz with a switchable 16 Hz – 2 kHz band, aligned to the TCO recommendations and building-biology practice, with an audio output for tracing a source.
Gigahertz Solutions GmbH · 16 Hz – 100 kHz, switchable 16 Hz – 2 kHz band · single-axis
Three-in-one meter with a three-axis 50/60 Hz magnetic sensor, a 50–2,000 V/m electric-field mode and an RF mode specified from 50 MHz to 10 GHz, in which the manufacturer states that readings below 1 GHz and from 8 to 10 GHz are for reference only.
LATNEX · RF: 50 MHz – 10 GHz (reference only below 1 GHz and 8–10 GHz) · mixed-axis
Isotropic tri-axis RF field-strength meter covering 10 MHz to 8 GHz over 38 mV/m to 20 V/m, with per-axis display, max and average readings, a calibration certificate in the box and manual storage of 200 data sets.
LATNEX · 10 MHz – 8 GHz · triple-axis
Handheld spectrum analyser covering 50 kHz – 960 MHz on the left connector and 240 MHz – 6.1 GHz on the right, with −125 dBm to +10 dBm dynamic range, 0.5 dBm amplitude resolution, automatic 2.6 kHz – 600 kHz resolution bandwidth, a switchable 25 dB LNA and up to 60 dB of attenuation.
RF Explorer · Left connector: 50 kHz – 960 MHz · single-axis
Single-axis broadband RF meter with a stated ±6 dB response from 400 MHz to 7.2 GHz, linear display from 0.1 to 1,000,000 µW/m², sub-5 µs pulse response and peak, max and average readings.
Safe Living Technologies Inc. · 200 MHz – 8 GHz full response; ±6 dB from 400 MHz to 7.2 GHz · single-axis
Three-mode meter with a three-axis AC magnetic mode over 40 Hz – 100 kHz to 100 mG, a single-axis AC electric mode to 1,000 V/m, an RF mode over 20 MHz – 6 GHz to 19.999 mW/m², and a frequency-weighted setting that scales the LF readings by frequency.
AlphaLab, Inc. · AC magnetic: 40 Hz – 100 kHz · mixed-axis
Same record, other formats