Russia public limit, 300 MHz–300 GHz
10 µW/cm² (0.1 W/m², or 100,000 µW/m²) time-averaged power flux density — roughly a hundredth of the ICNIRP public reference level and the strictest national RF limit in wide use.
Regulatorygeneral public0.3–300 GHz
Last verified 12 August 2026.
- Limit value
- 100,000–250,000 µW/m²Regulatory value — legally enforceable — SanPiN table for the population states 10 µW/cm²; 1 µW/cm² = 10,000 µW/m², so 10 µW/cm² = 0.1 W/m². A separate 25 µW/cm² entry applies in the qualified case noted in the table. Assessment is by average power flux density in this range.sources: russia-sanpin-1383, russia-sanpin-2021
- Quantity
- power density
- Frequency band
- 0.3–300 GHz
- Population
- general public
- Set by
- Russia SanPiN public RF limits (SanPiN 2.1.8/2.2.4.1383-03; hygienic norms consolidated in SanPiN 1.2.3685-21 (2021))
- Kind
- Regulatory — legally enforceable
Related records
- Russia SanPiN public RF limits
Russia's sanitary norms for public RF exposure, which cap power flux density at 10 µW/cm² from 300 MHz to 300 GHz — about a hundredth of the ICNIRP reference level.
Standards & frameworks
- ICNIRP 2020 general public reference level, 2–300 GHz
10 W/m² incident power density averaged over 30 minutes and over the whole body — the reference level that 5G mid-band and Wi-Fi compliance is judged against outside the U.S.
Exposure limits
Sources
- russia-sanpin-1383 СанПиН 2.1.8/2.2.4.1383-03, приложение 1, таблица 2 — ПДУ ЭМП 30 кГц–300 ГГц для населения — Главный государственный санитарный врач РФ (via ConsultantPlus), 2003. regulation, link checked 2026-08-12.
- russia-sanpin-2021 СанПиН 1.2.3685-21 — Гигиенические нормативы и требования к обеспечению безопасности факторов среды обитания — Роспотребнадзор (via ConsultantPlus), 2021. regulation, link checked 2026-08-12.
Same record, other formats